Scan the code to follow the Kejin official account.

Image Name
News Center

News Center

KGBAL News

Innovation Updates

News Center

Custom Joint Bearings: How Should Joint Bearings Be Lubricated?

Joint bearing manufacturers state that the allowable operating temperature of a joint bearing is primarily determined by the materials used for the mating surfaces; in particular, for self-lubricating joint bearings, the plastic liner material serving as the sliding surface exhibits a marked decline in load-carrying capacity at elevated temperatures. For lubricated joint bearings with steel–steel sliding surfaces, the permissible operating temperature is governed by the temperature limits of the lubricant. However, both lubricated and self‑lubricating joint bearings can generally be operated within a temperature range of –30°C to +80°C while maintaining their rated load‑carrying capacity.

15

2022

/

12

Custom Joint Bearing Manufacturer: Characteristics of Joint Bearings

Introduction to custom joint bearing manufacturers: Joint bearings have a simpler structure than rolling bearings, consisting primarily of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface, enabling them to withstand substantial loads. Typically used in low-speed oscillating (angular) motions, joint bearings—thanks to their spherical sliding surfaces—can also accommodate tilting within a certain angular range (self-aligning motion). Even when there is significant misalignment between the shaft and the housing bore, they can continue to operate normally.

09

2022

/

12

Custom Joint Bearing Manufacturer: Installation Methods for Joint Bearings

The custom joint bearing manufacturer states that a joint bearing is a spherical sliding bearing whose sliding contact surfaces consist of an inner spherical surface and an outer spherical surface, enabling rotation and angular oscillation in any direction during operation. It is manufactured using specialized processes such as surface phosphating, sintering, lining, and coating. Joint bearings feature high load-carrying capacity, shock resistance, corrosion resistance, wear resistance, self-aligning capability, and excellent lubrication.

05

2022

/

12

Rod End Joint Bearing Manufacturer: What are the characteristics of joint bearings?

The rod‑end joint bearing manufacturer states that a joint bearing is a type of spherical sliding bearing. Its sliding contact surfaces consist of an inner spherical surface and an outer spherical surface, allowing it to rotate and oscillate at any angle during motion. These bearings are manufactured using specialized processes such as surface phosphating, sandblasting, immersion rolling, and spray coating. Joint bearings offer high load‑carrying capacity, impact resistance, corrosion resistance, wear resistance, self‑aligning capability, and excellent lubrication performance.

28

2022

/

11

Rod End Joint Bearing Manufacturer: What are the classifications of joint bearings and what are their respective characteristics?

The structure of a spherical plain bearing is simpler than that of a rolling bearing. It consists primarily of an inner ring with a spherical outer surface and an outer ring with a spherical inner surface. Today, a rod‑end spherical bearing manufacturer will introduce the classifications of spherical bearings and their respective characteristics—let’s take a look!

21

2022

/

11

Rod End Spherical Bearing Manufacturer: What is a rod end spherical bearing?

The rod‑end joint bearing manufacturer states that a joint bearing is a spherical sliding bearing. The basic configuration consists of an inner ring and an outer ring, each featuring a spherical sliding contact surface. Joint bearings are primarily composed of an inner ring with a spherical outer surface and an outer ring with a spherical inner surface, enabling them to withstand substantial loads. Depending on the type and design, they can accommodate radial loads, axial loads, or a combination of both.

10

2022

/

11

< 123456 >